Blu-Lock 1" Male Adapter (MPT)

Our Most Popular

After burying the tubing stake it down with these holddowns to prevent it from surfacing. These stakes work for 3/4" or 1"...

$0.15

Barbed 1" x 1/2" Reducing Tee

The Barbed 1" x 1/2" Reducing Tee is used to send greywater to specific plants. Cut the main 1" line and insert the reducing...

$1.82

Green Back Valve Barbed 1/2"

The Green Back Valve Barbed 1/2" is used to adjust the flow from greywater outlets. For unfiltered greywater, this is a point...

$2.20

PVC 1" 90 Elbow

1" PVC elbow 90 degree elbow is used to make 90 degree bends.

$0.66

Underground Emitter Box

The underground emitter box, or "mulch shield" is used to create a subsurface irrigation area, where the greywater can...

$5.45

3-Way Valve Brass 1"

The Brass 1" 3-way Valve is used in laundry to landscape greywater systems to switch between the greywater and the sewer or...

$49.00

PVC 1" Male Adapter (S x MPT)

The PVC 1" Male Adapter threads into 3-way valve in the laundry to landscape greywater system. Always wrap threaded joints...

$0.65

Hose Clamp

A Hose Clamp is used to create a water tight seal between washer hose and barbed male pipe end. Can also be used outside to...

$0.91

ABS 1.5" Double Ell (aka twin 90)

The ABS 1.5" Double Ell is used to divide the flow of greywater into two equal sections in a branched drain system. The double...

$6.30

Barbed 1" Adapter (BxS)

The Barbed 1" Adapter (BxS) connects 1" PVC pipe to 1" Blu-Lock tubing.

$2.20

Blu-Lock 1" Male Adapter (MPT)

1" Blu-Lock Male Adaptor BLA-100-BM-1X (37678)

SKU: BLA-100-BM-1X (37678)

$1.39

Allows 1" Blu-Lock tubing to be connected to a 1" femaie pipe thread.

This part can be used in each of the following water-saving systems:

Laundry to Landscape (BluLock)

Laundry to Drum

Sand Filter to Drip

Wetland to Drip

Drum w/ Effluent Pump

Why Use Blu-Lock?

Blu-Lock fittings make a great alternative to traditional PVC solvent welded fittings and barbed fittings for laundry to landscape greywater systems! Let's go over the advantages:

1. Attaching fittings to pipe doesn't require any toxic glue! Simply push the pipe into the fitting.

2. No huge forearms required! Fittings and pipe are much easier to assemble than barbed fittings.

3. PVC free fittings! Blu-Lock fittings are made off UV resistant ABS which is much less toxic to manufacture than PVC.

Blu-Lock pipe is made from high density polyethylene which can be recycled after it's useful life. By using Blu-Lock fittings and pipe, a PVC free greywater irrigation system can be installed.

Feedback

If you experience a bug or would like to see an addition on the current page, feel free to leave us a message.

Customer 05/01/2012 - 13:58:

Those compression-valve shtouffs are horrible! Even if you fix it, there's a good chance that by the time you next need to shut off that line, it will either be ready to start leaking again or won't shut off completely, or both. Best thing to do is fix the leak and add a 1/4-turn valve with compression fittings (from a plumbing supply store;HD doesn't stock the right ones), then take the knob off the old valve. The old valve won't leak for a long time if you leave it completely opened.

(Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.10) Gecko/2009042316 Firefox/3.0.10)

Customer 05/03/2012 - 19:10:

You can also use a compression coiplung, 5/8 OD.Or you could use a ball valve with the same compression fittings on each end. If you choose this method of repair, be sur eto use a little pipe joint compund on ferrels and threads of compression fittings.It makes them tighten much easier.Also be sure not to over tighten end that cpvc goes in to. Good luck.

(Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.10) Gecko/2009042316 Firefox/3.0.10)

Message: *

Shopping Cart

Components

Our Most Popular

Why Use Blu-Lock?

Feedback